Dental Unit Chair Hard Leather Computer Controlled FDA CE Approved+Handpiece Kit

Description

Δ First ,The dental unit must be sent via ocean shipping(you need to offer a local port) because of its weight.
ΔSecond, After everything we talked about is cleared, we will order it from the manufacturers.
ΔThird,Sometimes we need to wait because of so many orders from factory. And sometimes we need to wait the shipping. All of these will take about many days, it usually costs about 20 days.
ΔThe most important, when the item arrives,it need to make the custom clearance for ocean shipping. as buyer ,you need pick it up from the port by yourselves.
Import duties, taxes and charges are not included in the item price. These charges are the buyer responsibility.
Standard Accessories:
All controlled by the electric valve
DC Motor
Automatic thermostatic water supply system
Compensate Wider Dental Unit
Handpiece tubing with standard fittings (3 sets)
Three way springe (one for hot ,one for cold) (2 sets)
Water suction and saliva ejector (1 set)
Powerful suction (HVE) apparatus (1 set)
Easy cleaning Integral ceramic spittoon
Built-in Water purified system with bottle
Strong and weak dual-purpose operation light (1 set)
Low-tension X-film viewer (1 set)
Spirit lock tight Equilibrium Device
Doctor stool (1 set)
Suitable for adult and children headrest
Foot pedal (1 set)
Gross weight: 200 Kg
Specifications:
Model: TJ2688 A1
Supply Voltage (110V 60Hz or 220V 50Hz )
Air Pressure (
＞
0.55Mpa)
Water Pressure (0.2Mpa-.04Mpa)
Lowest position of Dental chair (440mm)
Highest position of Dental chair (860mm)
Highest smallest angle of Dental Chair ( 5°)
Lowest smallest angle of Dental Chair ( 85°)
Specification:
High speed handpiece
Description:
Standard Push button type, high speed handpiece, Single-way water spray
Needle Change Type
Push button
Air Pressure
180~250 KPa (1.8~2.5 kgf/cm2)
Water Pressure
198Kpa (2 kg)
Rotation Speed
370,000-420,000 rpm
Head Hight
13.14 mm
Head Diameter
φ11.2 mm
Bur Applicable
φ1.59mm~φ1.6mm×21mm~23mm (diameter×length)
Noise
≤70dB
Low speed kits Features:
- E-type connector
- Wrench type
- Precise technology, Steady, no vibration while revolving, offering a steady operation.
- Suitable for any E-type handpiece accords with ISO standard
- 135°C Autoclavable, suitable for both steam and chemical autoclave
Contra angle handpiece
- Low Speed 22,000-27,000 rpm.
- The shank of the instrument mounted therein is 2.35 mm
- Fastening of the instruments with a turning latch
- Autoclavable 135°C
- For any lab or E-type motors
Straight Nosecone
- Working pressure: 0.3MPa ;
- 0.25MPa (Measure meter is installed at the end of air motor to measure the air pressure).
- Revolution: about 22000-27000r/min (adjustable between clockwise or anticlockwise)
- Noise: ≤68dB
- Air consumption: about 56L/min
- Ratio: 1:1
- Max speed of contra angle: 25000rpm/min.
Air Mortor
- Supply air pressure: 245-392KPa (2.5-4kgf/CM2)
- 1:1 Direct Drive
- 4 Hole
- Max speed 20,000 min-1
Specifications
Air-in Pressure(kg/c
㎡
)
Motor Rotation(rpm)
Air Wastage:(N1/min)
2.5
22,000
42
3
25,000
51
4
27,000
72
Packing List:
- High speed handpiece push button 4 Holes : 2 each
- E-type air motor 4-Holes: 1 each
- Straight nose cone: 1 each
- Contra Angle handpiece: 1 each
- Water spray nozzle: 1 each
- Oil spray nozzle: 1 each
- CAP Spanner: 1 each
FDA Statement
The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, you can bid on this item only if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.
Seller name:dentalbaistra
City,State:SHENZHEN,China
Telephone number:0755-23998165