Car Rear Windscreen Christmas Santa Claus/Snowman Wagging Wiper Sticker Decals

Description

HOME
CAR ACC
ON SALE
+FOLLOW
Car Rear Windscreen Waving Arm Wiper Sticker Christmas Santa Claus/Snowman Decals Styling Decor
Condition:
100% new
Color:
As picture shown
Material:
PVC
Santa Claus Size:
approx. 22x18.5 cm(8.66x7.28 inch) (LxW)
Snowman Size:
approx. 21x13.4 cm(8.27x5.27 inch) (LxW)
Item included:
1 x set car sticker
Suitable for:
wiper decals
Compatible With:
fit for universal
This Is Aftermarket Replacement Item But Not Genuine
Note:
1) All dimensions are measured by hand, there may be small deviations.
2) Color may vary slightly due to the color setting of each individual monitor.
Product Dimension:
Attribute:
Feature:
1) Follow the original factory specifications.
2) Easy installation.
3) This adorable Santa Claus design will put a smile on anyone's face.
4) Universal size fits any lower mounted rear wiper.
5) Both the Wiper Tag arm and window decals are detachable and UV protected against fading.
Simple installation:
1) Clean and dry rear window and wiper thoroughly.
2) Attach waving arm to wiper according to the instructions on packaging. You will be able to adjust slightly left or right as necessary.
3) Before removing back of decal, align to the correct side of the wiper for positioning. The snowman decal should attach to the left since he's waving his left arm. If needed, you can trim the decal to fit around the wiper arm if yours is mounted through the window.
4) Remove decal backing, align level with minimal touching on the adhesive, and from the bottom up gently lay the decal on the window pushing out any wrinkles on the way up. Remove and realign if needed. Save the paper backing if you want to reuse each season.
5) Follow up by using a credit card or something thin and flexible to push any wrinkles or bubbles towards the outside of the decal.
6) To get the most from your decal, keep your wiper blades free of dirt and debris. Remove the Wiper Tag arm before entering a car wash.
7) To remove the decal, make sure it is not freezing or it could tear. Remove indoors or warm with a blow dryer. Make sure your hands, window, and decal are clean and dry. Simply pick off an edge and slowly peel off, then apply back to the original paper. Remove Wiper Tag arm by tilting sideways and unlocking. The number of times the decal can be reused varies depending on well it is taken care of.